0118 981 5343
Weekdays 8am - 7pm
Ashby Banner Signage Systems are among the sturdiest and most durable available. Constructed from a combination of aluminium and steel components they are not only strong, light, low profile and attractive, but also a highly cost effective way of displaying large printed graphics. Ashby's range includes systems to mount banners both perpendicular and parallel to walls and also from posts or slimmer, vertical strictures. Although supplied as standard in black, these items can be powder coated to match graphics or existing branding.
Single Sided
![]() |
Double Sided
![]() |
V-Mount
![]() |
Inline
![]() |
Corniche
![]() |
|
---|---|---|---|---|---|
Posts
![]() |
|||||
Totem
![]() |
|||||
Freestanding
![]() |
|||||
Flat wall | |||||
Projecting
![]() |
|||||
Suspended
![]() |
Bannerfast 90 is a heavy duty alternative to the BannerSpring banner mounting system. It comprises two welded base plate projecting brackets with an additional post that enables a banner to be mounted perpendicular to the mounting surface.
Key Information
- Recommended suitable for banners of widths from 500mm to 800mm wide. (Height is, within reason) un-restricted. (Cable Stay Kits are recommended for systems to suit 801mm banners (or over) up to 1500mm)
- Optional black plastic post caps or welded end caps
- Kit comprises; 3x welded plate post projecting brackets, 3x 50mm Dia. posts (post caps/welded end caps) (nut inserts), 2x rigging screws (M6 Jaw) and 4x M6 eyebolts.
- Banner manufacture tech sheets can be found here
- Comes black as standard, although other powder and wet coating are available
- Lead times start from a five day manufacture.
The BannerFast 90 system is ideally suited to outside or inside public buildings such as; libraries, museums or schools etc. For more information contact the team here at Ashby™ sales@ashbytrade.co.uk or 01189 815343
Bannerfast 180 is similar in design to Bannerfast 90 but instead sits parallel to the wall. The banner mount system comprises four welded projecting brackets and three aluminium poles and is suitable for large banners (up to 1500mm wide). Banners are tension-ed using two rigging screws after looping the banner over the uppermost pole.
Key Information
- Recommended suitable for banners of widths from 500mm to 1500mm wide. (Height is, within reason) un-restricted
- Optional black plastic post caps or welded end caps
- Kit comprises; 4x welded projecting brackets, 4x 50mm Dia. posts (post caps/welded end caps) (nut inserts), 2x rigging screws (M6 Jaw), 4x M6 eyebolts
- Banner manufacture tech sheets can be found here
- Comes black as standard, although other powder and wet coating are available
- Lead times start from a five day manufacture.
The BannerFast system is ideally suited to outside or inside public buildings such as; libraries, museums or schools etc. For more information contact the team here at Ashby™ sales@ashbytrade.co.uk or 01189 815343
NOTE: Mountings to wall and banner are not included although are optional extras
BannerSpring is a post-mounted heavy duty banner mount system that utilises a two-part, cast aluminium bracket joined with a steel spring to allow the poles to move independently without the fixed part leaving the mounting surface. Additionally, the spring loaded construction reduces wind loading on the banner by up to 88% vs. a non spring-loaded system.
Key Information
- Suitable for banners widths from 300mm to 800mm wide. Height is (within reason) un-restricted.
- Kit comprises; 2x (2-part) gravity cast aluminium brackets, 2x GRP projecting poles, 2x Safety pins, 6x 36" screwbandings (with captive housing screws) here
- Can withstand wind speeds of up to 80mph by way of avoiding banner repair and replacements. (Tech diagram here
- Banner manufacture tech sheets can be found here
- Comes black as standard, although other powder and wet coating are available
- Lead times start from same day for stocked items
- Lead times for manufacture start from same day despatch for black. 3-5 days on stock powder coating colours
The Banner-Spring system is ideally suited to locations which are relatively inaccessible (dual carriageways, high streets etc) . For more information contact the team here at Ashby™ sales@ashbytrade.co.uk or 01189 815343